消防水力推算软件

更多文章 >>

• FHC 软件因应全球消防尺度差距，助力工程师实现跨区域水力推算合规
• FHC 水力推算软件，支持多尺度管网分析与急剧推算
• FHC 水力推算软件颁布职能概览，全面适配国际消防尺度
• FHC水力推算软件在自动喷水灭火系统中的利用

?

FHC是一个水力推算法式，用于消防喷水灭火系统和其他切合尺度的水基固定式消防系统
。它已成功能于消防喷淋系统、喷水、ESFR、雨淋、水帘、软管卷盘、消防栓、泡沫洒水器、环形干线、泡沫监督器和细水雾系统
。

?

• 切合NFPA、FM和LPC等尺度
• 能够对肆意类型的官网进行建模、例如环路、网格或肆意组合
• 仿照消防喷水灭火系统、雨淋、环形干管、消防栓等...
• 多种管路类型
• 确定全局设计密度或单独设置每个头
• 在LPC和EN 12845的情况下，自动找到距离远的头或四个MRH
• 自动蕴含三通和弯优等效长度
• 凭据maximum压降和管路速度自动调整管路尺寸（只限树形系统）
• 自动管路节点编号
• 推算洪水曲线（例如消防泵或城市供水）和水源压力和流量或滑润
• FHC能够使用Hazen-Williams或Darcy-Weisbach压力损失方程
• 官网等轴测图、平面图和立面示意图
• 易于阅读且内容丰硕的汇报，您能够预览并输出为PDF

?

FHC—用于消防喷淋和细水雾系统

消防工程师使用FHC液压推算软件来援手设计切合尺度的刻薄的消防系统，蕴含EN 12845、BS 9251、EN 16925、EN 14972-1、FM Global、NFPA 13、NFPA 750和LPCB/BRE律例
。

?

FHC—合用于全数类型的水基消防系统

FHC是一款久经考验的消防喷水灭火系统水力推算和分析软件
。它已经援手数百家公司实现了他们的设计项目，从一些宽泛的物流设施到汽车造作厂的复杂屋顶和货架系统
。不论项目规模和复杂水平若何，FHC都能提供援手
。

?

FHC急剧、正确、靠得住、易学，能够推算从树到环路到复杂网格的全数管网
。

?

?

FHC能够推算全数类型的水力模型

从复杂的带有屋顶和支架的消防喷淋装置、细水雾系统、喷水系统、消防栓或水炮装置
。此表，FHC险些能够推算肆意水基消防系统，很矫捷
。肆意管路网络都能够从一棵树构建，循环到多个循环系统或肆意组合
。

?

当您在FHC中创建管网和连收受路时，FHC将自动查找肆意三通和弯头，并在其重大的管材和管件数据库中查找等效长度
。这将为您节俭大量功夫，并且不易出现输入谬误
。此表，若是您更改管路配置，FHC将自动进行必要的管件调整以确保您的水力模型是新的
。

?

?

FHC的急剧推算算法

FHC将在几秒钟内为您提供所需的了局，让您专一于优化系统以实现经济的设计
。此表，您能够选择使用Hazen-Williams或Darcy-Weisbach压力损失方程来推算管路摩擦损失
。FHC合用于消防喷淋系统&凹凸压细水雾系统等高要求系统
。

?

FHC能够推算出系统所需的水源压力和流量，或者您能够指定消防泵曲线、恒压泵或城市供水，FHC将平衡系统到供水
。

?

?

FHC Hydraulic Calculation Software您能够使用一组画图工具急剧构建复杂的水力模型，这些工具允许您在推算机上绘造系统的水力模型
。因而，您能够立即看到管网更新，很大限度的削减输入谬误，让您专一于优化您的消防系统，节俭设计功夫和装置较幼管路尺寸或少量供水的成本
。

?

细水雾系统

FHC软件与细水雾系统有着持久的联系
。细水雾造作商使用它来推算船舶和工业利用的高压系统到酒店和住宅的低压系统
。

?

FHC可用于NFPA 750中界说的低压、中压和高压系统，您能够轻松的在Hazen-Williams和Darcy-Weisbach压力损失公式之间切换
。

?

支持全数重要细水雾设计尺度，蕴含NFPA 750、BS 8458、BS 8489、EN 14972-1和Vds 3188
。

?

?

住宅晒水系统

在从前的二十年里，Canute援手并造订了英国和欧洲的设计尺度
。因而，FHC可用于BS 9251、EN 16925、NFPA 13D和 13R以及好多其他设计尺度
。

?

我们坚信住宅洒水器将有助于援救性命、财富和环境
。凭借我们对这项技术的知识，FHC能够进行所需的水力推算也就不及为奇了，您也能够利用1xBET知识来援手您实现
。

?

?

特殊风险

FHC同样合用于为要求更高的消防系统进行水力推算，例如泡沫顶部浇注器、高压水枪以及中高压水覆没系统
。使用FHC，选择是无限无尽的
。

?

?

?

【英文介绍】

?

FHC is a full hydraulic calculation program for use with fire sprinkler systems and other water based fixed fire protection systems to International standards. It has been used successfully with fire sprinkler systems, water spray, ESFR, deluge, drencher, hose reel, hydrant, foam sprinklers, ring mains, foam monitors and water mist systems.

?

• Complies with international standards such as NFPA, FM and LPC
• Any type of pipe network can be modelled such as trees, loops, grids or any combination
• Models fire sprinkler systems, deluge, ring mains, hydrant and much more...
• Multiple pipe types
• Specify a global design density or set each head individual
• Automatically find the most remote head or the four MRH in the case of LPC and EN 12845.
• Automatically includes tee and elbows equivalent lengths
• Automatic pipe sizing based on maximum pressure drop or pipe velocity (tree systems only).
• Automatic pipe node numbering.
• Calculate source pressure and flow or balance to a water supply curve such as a fire pump or city supply.
• FHC can use Hazen-Williams or Darcy-Weisbach pressure loss equations
• Isometric, plan and elevation schematic views of the pipe network
• Easy to read and inclusive reports which you can preview and output to PDF.
• FHC – for all types of water base fire protection systems

?

FHC is a tried and tested hydraulic calculation & analysis software for fire sprinkler systems. It has helped hundreds of companies with their design projects, from complex roof & rack systems for some of the most extensive logistics facilities to car manufacturing plants. Whatever the project size and complexity, FHC will be able to help.

?

FHC is fast, accurate, dependable, easy to learn, and can calculate any pipe network from a tree and loops to complex grids.

?

FHC can calculate any type of hydraulic model

from the most complex fire sprinkler installations with roof and racks, water mist systems, water spray systems, hydrants or a water cannon installation. In addition, FHC can calculate almost any water-based fire protection system and is very flexible. Any pipework network can be built from a simple tree, looped to multiple looped systems or any combination.

?

As you create the pipe network in FHC and when you connect the pipes, FHC will automatically find any tee's and elbows and look up the equivalent length in its extensive tube and fitting database. This will save you considerable time and is less prone to input errors. Also, if you change the pipework configuration, FHC will automatically make the necessary fitting adjustments to ensure your hydraulic model is up to date.

?

FHC's fast calculation algorithm

FHC will give you the results you require in seconds, allowing you to concentrate on optimising the system for the most economical design. In addition, you can choose to use Hazen-Williams or Darcy-Weisbach pressure loss equations to calculate the pipe friction loss. FHC is suitable for fire sprinkler systems & high and low-pressure water mist systems, and other high demanding systems.

?

FHC can calculate the source pressure and flow required for the system, or you can specify a fire pump curve, constant pressure pump or a city water supply, and FHC will balance the system to the water supply.

?

FHC in action

FHC Hydraulic Calculation Software you can build complex hydraulic models quickly with a set of drawing tools which allow you to draw the hydraulic model of the system on your computer. As a result, you can instantly see the pipe network updating, which minimises input errors and allows you to concentrate on optimising your fire protection system, saving design time and installation costs with smaller pipe sizes or a small water supply.